Customizable Rotary Hot Stamping Machines
R8BX
Large Decoration on Flat and Slightly Contoured Surfaces
The R8BX was developed to apply large decorations on flat and contoured parts with enhanced efficiency.
For example, the R8BX:
- Eliminates air entrapment rejects
- Reduces set up and changeover time by as much as 50% thanks to superior programmability
- Improves worker efficiency with standard safety features
- Provides enhanced flexibility with optional Pneumatic Slide Tables
R8BX
Large Decoration on Flat and Slightly Contoured Surfaces
The R8BX was developed to apply large decorations on flat and contoured parts with enhanced efficiency.
For example, the R8BX:
- Eliminates air entrapment rejects
- Reduces set up and changeover time by as much as 50% thanks to superior programmability
- Improves worker efficiency with standard safety features
- Provides enhanced flexibility with optional Pneumatic Slide Tables
Features
Eliminate Air Entrapment Rejects
Roll-on ProcessThe rolling motion naturally forces the air out during application, eliminating rejects from voids or blisters caused by air entrapment.
Versatility
Swing-Arm Design for Contoured & Flat SurfacesNot just for flats, the R8BX’s standard swing-arm roller feature allows it to trace over the contours of parts expanding its capabilities versus the competition.
Programmability
Up to 50% faster set ups and changeoversProgrammable parameters with convenient recipe storage for roller temperature, decorating speed, decorating length and decorating position.
Improved Safety & Efficiency
Standard Safety PackageWith an inherently longer decorating cycle, the standard safety package not only protects the operator but allows them to perform additional tasks during the decorating cycle improving their efficiency.
Enhanced Flexibility
Optional Pneumatic Slide Tables (300mm & 500mm Stroke Lengths)Increases the flexibility of the systems for a wider product range while providing unobstructed access for part handling. Fully retrofittable to existing systems.
Learn more about the R8BX
| Additional Features |
- Suited for both Hot Stamp and/or Heat Transfer Decorating Applications
- Tool-Free Foil / Label Changeover
- System can accommodate silicone rubber rollers up to 6 inches in diameter, and from 1 to 8 inches long
- Constant Torque for Smooth Foil / Label Advance
- Reduced Setup Times
- Quiet, Smooth Cycling
- Optional Robot Interfacing
- Optional Low Foil and/or Broken Foil Detection
Technical Specifications
| Technical Data | |
| R8BX | |
| Head Stroke | 2″ |
| Roller Width | 1″ – 8″ |
| Roller Diameter | 6″ |
| Roller Travel | 1- 20″ |
| A – Height | 77″ |
| B – Width (Wide) | 99″ |
| C – Depth (Deep) | 49” |
| D – Working Height | |
| E – Throat Depth | |
| Electrical Requirements (Volts) | 220
480 |
| Air Requirements (CFM) | 3 |
| Air Requirements (PSI) | 30-100 |
| Net Weight (Pounds) | |
